\n
- \n
- High-speed processing by hardware implementation\/li>\n
- High-end image processing engine for high-resolution\/li> \n
- 32-bit RISC CPU embedded\/li> \n
- Correction for sensor\/li> \n
- Adaptive image signal processing\/li>\n
- Auto processing:\n
- \n
- Auto exposure\/li>\n
- Auto focus (multi point, continuous)\/li>\n
- Auto white balance\/li>\n\/ul>\n\/li>\n
- \n\/div>\n\n
- Others:\n
- \n
- Hardware face detection\/li>\n
- JPEG encoder (including speed tags)\/li>\n
- MIPI virtual channel\/li>\n
- Triple scaler\/li>\n
- Alternate row HDR\/li>\n
- De-fog\/li>\n
- RGB+IR\/li>\n\/ul>\n\/li>\n\/ul>\n
\n Block Diagram\/a>\n\n\/p>\n\/div>\n
\n\n\nTHine Releases a New LVDS IC for full-HD\/div>\nTHC63LVD1022\/b>\/div>\n\nTHC63LVD1022, a Dual Pixel Link LVDS receiver IC, is designed to support pixel data transmission of up to 1080p\/60Hz between host and flat panel display or between camera module and system board, supporting varied I\/O data mapping, suited to not only TV applications but also to projectors, industrial and security camera systems.\n\n\n\n\/div>\n\n
\nEssential Features\/b>\n Block Diagram\/a>\n\n- \n
- LVDS to TTL\/CMOS Conversion\/li>\n
- 5ch LVDS 2ports (dual pixel link) input:\n\t
- \n\t\t
- 525Mbps\/ch\/li>\n\t\t
- LVDS input skew margin ±400ps at 75MHz\/li>\n\t\t
- Failsafe supported\/li>\n\t\/ul>\n\/li>\n
- TTL\/CMOS Parallel 1port output:\n\t
- \n\t\t
- 33bits\/pixel (sync signal included\/li>\n\t\t
- 150M pixel\/sec. (clock frequency 20 to 75MHz)\/li>\n\t\t
- MSB\/LSB reverse available\/li>\n\t\t
- R\/G\/B replace available\/li>\n\t\/ul>\n\/li>\n
- Package: TQFP100\/li>\n
- Power Supply: 3.3V\/li>\n
- Operation Temperature: 0 to 85°C\/li>\n
- Recommended Tx: \n\t
- \n
- THC63LVD827\/a>\/li>\n
- THC63LVD823B\/a>\/li>\n
- THC63LVD1023B\/a>\/li>\n\t\/ul>\n\/li>\n\/ul>\n\n\n\n\/div>\n\n
\n\nTHine Releases its new LED Driver line-up enhancing high-power LED Equipment\/div>\nTHL6521 and THL6523\/b>\/div>\n\nTHine added its new 1-channel LED driver products, THL6521 and THL6523, to its existing LED driver line-up of THL-series.\nThe latest drivers are suitable for applications using high-power LEDs, such as LCD backlights and LED lightings \nin mobile phones, tablets, car navigation, LCD monitors, amusement equipment, digital camcorders\/still cameras, ATM, and other industrial equipment.\n\nAdding these new products to the existing 4-channel THL6516, 6-channel THL6517 and 8-channel THL6518, THine’s portfolio of LED driver\nfeatures build-in boost converter circuits that convert the common 5V power supply to the right LED power supply voltage, realizing LED backlight systems \nwith just a single chip.\n\nThe new products are packaged in 6-lead TSOT23-6 housings that significantly reduce the footprint for LED backlight \nand lighting systems. In addition, both have soft start functions and other protection functions to prevent system damage\nfrom abnormal LED failures.\n\/div>\n\n\nEssential Features of THL6521 and THL6523\/b>\n Block Diagram\/a>\n\n- \n
- Input voltage range: 2.5V ~ 5.5V\/li>\n
- Boost converter:\n\t
- \n\t\t
- output voltage 38V max\/li>\n\t\t
- switching frequency: 1MHz\/li>\n\t\/ul>\n\/li>\n
- PWM dimming control: 100Hz ~ 200kHz\/li>\n
- LED driver feedback voltage:\n\t
- \n\t\t
- THL6521: 100mV\/li>\n\t\t
- THL6523: 300mV\/li>\n\t\/ul>\n\/li>\n
- Protections: \n\t
- \n\t\t
- soft start\/li>\n\t\t
- over current protection\/li>\n\t\t
- under voltage protection\/li>\n\t\t
- over voltage protection \/li>\n\t\t
- thermal shut down\/li>\n\t\/ul>\n\/li>\n
- TSOT23-6 package\/li>\n\/ul>\n\n\n\n\/div>\n\n
\n\nTHine Unveils a new Suite of LED Drivers for Illumination Signage and Backlighting\/div>\n\n\n\/div>\nWith Gradient Controller For Full Color LEDs \/i>\nThis new family of LED display drivers have been developed to provide an ideal match with THine’s highly reliable LVDS and power IC technology. Since gradation data is transmitted via LVDS, the resulting high immunity against electrostatic noise, etc., minimizes erroneous illumination. Thanks to a built-in LVDS repeater function, LED drivers can be easily cascaded without additional expense for external buffers thus\nalso reducing engineering effort. The device is secured against destruction by means of a safeguard function that is employed in the company’s power ICs. This series is ideally suited for tablet PCs, amusement equipment, illuminations and other spectacular lighting performances. \n\n Block Diagram\/a>\n\/div>\n\n\/div>\nTailored for Power LEDs with a Battery of Protection Functions\/i>\nThis new family of Power LED drivers support an internal 1-channel boost converter which is capable of boosting 40V LED power supply from a single 5V input, for which reason all functions could be realized with a single chip. The line-up of 4, 6 and 8-channel constant current drivers\nallows flexible system optimization. Guarding functions, such as soft-start, overcurrent\/short-circuit protection, low voltage input error protection, overvoltage protection and thermal shutdown are included to prevent secondary system destruction against LED failure and other abnormal conditions. The small QFN16 package helps construct backlight and lighting systems with only a small footprint.\n\nBlock Diagram\/a>\n\/div>\n
\n\n\nTHine launches new V-by-One®\/sup>HS products for multifunction printers, cameras, amusement…\/div>\n\n\nOverview\/b>\n\nTHine Electronics, Inc. adds two high-speed serial interface LSIs to its V-by-One®HS family,\ndesigned in particular for electronic goods processing video data signals, such as\nmulti-function printers, cameras, scanners, factory automation equipment, amusement electronics,\nand more.\n\nThe new products, designated THCV233 and THCV234, convert between LVDS and V-by-One®HS whilst\nachieving a high speed of 3Gbps thus minimizing cable lines to one sixth of conventional LVDS \nwiring, EMI and parts count, such as moving heads of scanners and related components.\n\nIn addition, THCV233 and THCV234 enhance noise tolerant features drastically for improved \ncommunication control data flow between, for instance, scanner heads and controllers,\nhence reducing cost for noise cancellation and EMI countermeasures. \n\/div>\n\nKey Benefits\/b>\n\nMain link\/i>\/b>\n- \n
- Conversion between LVDS and V-by-One® HS\/li>\n
- Selectable color depth: 32bit or 24bit\/li>\n
- LVDS clock frequency: 100MHz max.\/li>\n
- V-by-One®HS data rate: 3.4Gbps max.\/li>\n
- Pre-emphasis and equalizer\/li>\n
- On chip data error test mode\/li>\n\/ul>\n\nSub-link\/i>\/b>\n
- \n
- Reciprocal control between THCV233 and THCV234 through sub-links\/li>\n
- 2-wire serial interface: 400Kbps max.\/li>\n
- GPIO: 4 (THCV233), 5 (THCV234)\/li>\n\/ul>\n\nSmall package: 7mm x 7mm 48-pad QFN\nSupports dual power source: 1.8V and 3.3V\nOperation temperature: -40°C to 105°C\/b>\n\/div>\n
\nV-by-One is a registered trademark of THine Electronics, Inc.\/div>\n\n\n","protected":false},"featured_media":0,"template":"","device_cat":[6],"country_cat":[17],"class_list":["post-154","device","type-device","status-publish","hentry","device_cat-device_cat05","country_cat-country_cat08"],"acf":[],"_links":{"self":[{"href":"https:\/\/si-tech.co.jp\/eng\/wp-json\/wp\/v2\/device\/154","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/si-tech.co.jp\/eng\/wp-json\/wp\/v2\/device"}],"about":[{"href":"https:\/\/si-tech.co.jp\/eng\/wp-json\/wp\/v2\/types\/device"}],"version-history":[{"count":3,"href":"https:\/\/si-tech.co.jp\/eng\/wp-json\/wp\/v2\/device\/154\/revisions"}],"predecessor-version":[{"id":395,"href":"https:\/\/si-tech.co.jp\/eng\/wp-json\/wp\/v2\/device\/154\/revisions\/395"}],"wp:attachment":[{"href":"https:\/\/si-tech.co.jp\/eng\/wp-json\/wp\/v2\/media?parent=154"}],"wp:term":[{"taxonomy":"device_cat","embeddable":true,"href":"https:\/\/si-tech.co.jp\/eng\/wp-json\/wp\/v2\/device_cat?post=154"},{"taxonomy":"country_cat","embeddable":true,"href":"https:\/\/si-tech.co.jp\/eng\/wp-json\/wp\/v2\/country_cat?post=154"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
- THC63LVD823B\/a>\/li>\n
- THC63LVD827\/a>\/li>\n
\n- \n
- Others:\n